Device analog input pin, register and interrupt vector assignments of input voltage feedback signal(s) of the buck converter. More...

Collaboration diagram for Buck Converter:

#define	_BUCK_VIN_ADCInterrupt _ADCAN12Interrupt
	ADC input assignments of input voltage feedback signals. More...

#define	_BUCK_VIN_ADCISR_IF _ADCAN12IF
	ADC interrupt flag bit of the input voltage feedback channel. More...

#define	BUCK_VIN_ANSEL _ANSELC0
	GPIO analog function mode enable bit. More...

#define	BUCK_VIN_ADCCORE 8
	0=Dedicated Core #0, 1=Dedicated Core #1, 8=Shared ADC Core More...

#define	BUCK_VIN_ADCIN 12
	Analog input number (e.g. '5' for 'AN5') More...

#define	BUCK_VIN_ADCBUF ADCBUF12
	ADC input buffer of this ADC channel. More...

#define	BUCK_VIN_ADCTRIG PG1TRIGB
	Register used for trigger placement. More...

#define	BUCK_VIN_TRGSRC BUCK_PWM_TRGSRC_TRG2
	PWM1 (=PG1) Trigger 2 via PGxTRIGB. More...

Detailed Description

Device analog input pin, register and interrupt vector assignments of input voltage feedback signal(s) of the buck converter.

Macro Definition Documentation

◆ _BUCK_VIN_ADCInterrupt

#define _BUCK_VIN_ADCInterrupt _ADCAN12Interrupt

ADC input assignments of input voltage feedback signals.

In this section the ADC input channels, related ADC result buffers, trigger sources and interrupt vectors are defined. These settings allow the fast re-assignments of feedback signals in case of hardware changes. ADC interrupt service routine function call of the input voltage feedback channel

Definition at line 500 of file dpsk3_hwdescr.h.

◆ _BUCK_VIN_ADCISR_IF

#define _BUCK_VIN_ADCISR_IF _ADCAN12IF

ADC interrupt flag bit of the input voltage feedback channel.

Definition at line 501 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_ADCBUF

#define BUCK_VIN_ADCBUF ADCBUF12

ADC input buffer of this ADC channel.

Definition at line 506 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_ADCCORE

#define BUCK_VIN_ADCCORE 8

0=Dedicated Core #0, 1=Dedicated Core #1, 8=Shared ADC Core

Definition at line 504 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_ADCIN

#define BUCK_VIN_ADCIN 12

Analog input number (e.g. '5' for 'AN5')

Definition at line 505 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_ADCTRIG

#define BUCK_VIN_ADCTRIG PG1TRIGB

Register used for trigger placement.

Definition at line 507 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_ANSEL

#define BUCK_VIN_ANSEL _ANSELC0

GPIO analog function mode enable bit.

Definition at line 503 of file dpsk3_hwdescr.h.

◆ BUCK_VIN_TRGSRC

#define BUCK_VIN_TRGSRC BUCK_PWM_TRGSRC_TRG2

PWM1 (=PG1) Trigger 2 via PGxTRIGB.

Definition at line 508 of file dpsk3_hwdescr.h.