User-declaration of fault object trip and recovery delays of the buck converter using physical quantities. More...

Collaboration diagram for Buck Converter:

#define	BUCK_UVLO_TRIP_DELAY (float) 5e-3
	Global defines for fault-monitor related parameters. More...

#define	BUCK_UVLO_RECOVERY_DELAY (float) 500e-3
	under voltage lock out recovery delay in [sec] More...

#define	BUCK_OVLO_TRIP_DELAY (float) 5e-3
	over voltage lock out trip delay in [sec] More...

#define	BUCK_OVLO_RECOVERY_DELAY (float) 500e-3
	over voltage lock out recovery delay in [sec] More...

#define	BUCK_REGERR_TRIP_DELAY (float) 50e-3
	regulation error trip delay in [sec] More...

#define	BUCK_REGERR_RECOVERY_DELAY (float) 2000e-3
	regulation error recovery delay in [sec] More...

#define	BUCK_OCP_TRIP_DELAY (float) 2e-3
	over current proection trip delay in [sec] More...

#define	BUCK_OCP_RECOVERY_DELAY (float) 2000e-3
	over current proection recovery delay in [sec] More...

#define	BUCK_FAULT_RESTART_CYCLES 10
	Maximum number of restart cycles: Fault state will be latched until CPU reset or power cycle. More...

Detailed Description

User-declaration of fault object trip and recovery delays of the buck converter using physical quantities.

Macro Definition Documentation

◆ BUCK_FAULT_RESTART_CYCLES

#define BUCK_FAULT_RESTART_CYCLES 10

Maximum number of restart cycles: Fault state will be latched until CPU reset or power cycle.

Definition at line 957 of file dpsk3_hwdescr.h.

◆ BUCK_OCP_RECOVERY_DELAY

#define BUCK_OCP_RECOVERY_DELAY (float) 2000e-3

over current proection recovery delay in [sec]

Definition at line 955 of file dpsk3_hwdescr.h.

◆ BUCK_OCP_TRIP_DELAY

#define BUCK_OCP_TRIP_DELAY (float) 2e-3

over current proection trip delay in [sec]

Definition at line 954 of file dpsk3_hwdescr.h.

◆ BUCK_OVLO_RECOVERY_DELAY

#define BUCK_OVLO_RECOVERY_DELAY (float) 500e-3

over voltage lock out recovery delay in [sec]

Definition at line 951 of file dpsk3_hwdescr.h.

◆ BUCK_OVLO_TRIP_DELAY

#define BUCK_OVLO_TRIP_DELAY (float) 5e-3

over voltage lock out trip delay in [sec]

Definition at line 950 of file dpsk3_hwdescr.h.

◆ BUCK_REGERR_RECOVERY_DELAY

#define BUCK_REGERR_RECOVERY_DELAY (float) 2000e-3

regulation error recovery delay in [sec]

Definition at line 953 of file dpsk3_hwdescr.h.

◆ BUCK_REGERR_TRIP_DELAY

#define BUCK_REGERR_TRIP_DELAY (float) 50e-3

regulation error trip delay in [sec]

Definition at line 952 of file dpsk3_hwdescr.h.

◆ BUCK_UVLO_RECOVERY_DELAY

#define BUCK_UVLO_RECOVERY_DELAY (float) 500e-3

under voltage lock out recovery delay in [sec]

Definition at line 949 of file dpsk3_hwdescr.h.

◆ BUCK_UVLO_TRIP_DELAY

#define BUCK_UVLO_TRIP_DELAY (float) 5e-3

Global defines for fault-monitor related parameters.

This section is used to define power supply fault object timing settings. The fault monitor is continuously monitoring declared data objects at the high-priority task frequency defined by MAIN_EXECUTION_PERIOD. Based on this known interval, filtering delays for fault trip and fault recovery events to allow users to adjust the fault detection sensitivity.

Fault Trip Event Delay
This setting defines for how long a fault condition has to be continuously active before the effective fault trip status/event will be triggered.
Fault Recovery Event Delay
This setting defines for how long a fault condition has to be continuously cleared before the effective fault recovery status/event will be triggered.
Restart Cycle Limit In case of a persistent fault condition (e.g continuous short circuit or unstable feedback loop) the fault monitor will limit the number of restart attempts specified by FAULT_RESTART_CYCLES. When this threshold is exceeded, the power supply will latch in save state (off) and a CPU or power cycle is required to start-up the power supply again. under voltage lock out trip delay in [sec]

Definition at line 948 of file dpsk3_hwdescr.h.