Conversion macros for user-declarations of startup timing periods of the buck converter. More...

Collaboration diagram for Buck Converter:

#define	BUCK_POD (uint16_t)(((float)BUCK_POWER_ON_DELAY / (float)MAIN_EXECUTION_PERIOD)-1.0)
	Conversion Macros of Startup Timing Settings. More...

#define	BUCK_VRAMP_PER (uint16_t)(((float)BUCK_VRAMP_PERIOD / (float)MAIN_EXECUTION_PERIOD)-1.0)

#define	BUCK_VREF_STEP (uint16_t)((float)BUCK_VOUT_REF / (float)(BUCK_VRAMP_PER + 1.0))

#define	BUCK_IRAMP_PER (uint16_t)(((float)BUCK_IRAMP_PERIOD / (float)MAIN_EXECUTION_PERIOD)-1.0)

#define	BUCK_IREF_STEP (uint16_t)((float)BUCK_ISNS_REF / (float)(BUCK_VRAMP_PER + 1.0))

#define	BUCK_PGD (uint16_t)(((float)BUCK_POWER_GOOD_DELAY / (float)MAIN_EXECUTION_PERIOD)-1.0)

Detailed Description

Conversion macros for user-declarations of startup timing periods of the buck converter.

Macro Definition Documentation

◆ BUCK_IRAMP_PER

#define BUCK_IRAMP_PER (uint16_t)(((float)BUCK_IRAMP_PERIOD / (float)MAIN_EXECUTION_PERIOD)-1.0)

Definition at line 821 of file dpsk3_hwdescr.h.

◆ BUCK_IREF_STEP

#define BUCK_IREF_STEP (uint16_t)((float)BUCK_ISNS_REF / (float)(BUCK_VRAMP_PER + 1.0))

Definition at line 822 of file dpsk3_hwdescr.h.

◆ BUCK_PGD

#define BUCK_PGD (uint16_t)(((float)BUCK_POWER_GOOD_DELAY / (float)MAIN_EXECUTION_PERIOD)-1.0)

Definition at line 823 of file dpsk3_hwdescr.h.

◆ BUCK_POD

#define BUCK_POD (uint16_t)(((float)BUCK_POWER_ON_DELAY / (float)MAIN_EXECUTION_PERIOD)-1.0)

Conversion Macros of Startup Timing Settings.

These conversion macros are used to convert user settings defined as physical quantities into binary (integer) numbers, which will be written to registers and variables and used in calculations throughout the firmware.

Definition at line 818 of file dpsk3_hwdescr.h.

◆ BUCK_VRAMP_PER

#define BUCK_VRAMP_PER (uint16_t)(((float)BUCK_VRAMP_PERIOD / (float)MAIN_EXECUTION_PERIOD)-1.0)

Definition at line 819 of file dpsk3_hwdescr.h.

◆ BUCK_VREF_STEP

#define BUCK_VREF_STEP (uint16_t)((float)BUCK_VOUT_REF / (float)(BUCK_VRAMP_PER + 1.0))

Definition at line 820 of file dpsk3_hwdescr.h.