#include <power_control/drivers/npnz16b.h>
Definition at line 183 of file npnz16b.h.
◆ agc_enabled
| volatile bool agc_enabled |
Bit 11: when set, Adaptive Gain Control Modulation is enabled.
Definition at line 198 of file npnz16b.h.
◆ enabled
Bit 15: enables/disables control loop execution.
Definition at line 202 of file npnz16b.h.
◆ invert_input
| volatile bool invert_input |
Bit 14: when set, most recent error input value to controller is inverted.
Definition at line 201 of file npnz16b.h.
◆ lower_saturation_event
| volatile bool lower_saturation_event |
Bit 0: control loop is clamped at minimum output level.
Definition at line 186 of file npnz16b.h.
◆ swap_source
| volatile bool swap_source |
Bit 13: when set, AltSource is used as data input to controller.
Definition at line 200 of file npnz16b.h.
◆ swap_target
| volatile bool swap_target |
Bit 12: when set, AltTarget is used as data output of controller.
Definition at line 199 of file npnz16b.h.
◆ unsigned
Bit 2: reserved.
Bit 11: reserved.
Bit 9: reserved.
Bit 8: reserved.
Bit 7: reserved.
Bit 6: reserved.
Bit 5: reserved.
Bit 4: reserved.
Bit 3: reserved.
Definition at line 188 of file npnz16b.h.
◆ upper_saturation_event
| volatile bool upper_saturation_event |
Bit 1: control loop is clamped at maximum output level.
Definition at line 187 of file npnz16b.h.
◆ value
Controller status full register access.
Definition at line 204 of file npnz16b.h.
The documentation for this struct was generated from the following file:
- dpsk_boost_vmc.X/sources/power_control/drivers/npnz16b.h
Collaboration diagram for NPNZ_STATUS_s: