drv_custom_config_pwm.h

Go to the documentation of this file.

 
#ifndef DRV_CONFIG_CUSTOM_PWM_H
#define DRV_CONFIG_CUSTOM_PWM_H
 
#include "pwrctrl/pwrctrl_typedef.h"
#include "drv_mcc_extension_pwm.h"
//#include "config/macros.h"
#include "pwm_hs/pwm.h"
 
 
static __inline__ void DRV_Config_Custom_PWM(void)
{
    //PWMs needs to be re-triggerable for cascaded PWM scheme
    PWM_Trigger_Mode(PWM_PRI_1, PWM_TRIG_MODE_RETRIGGERABLE);
    PWM_Trigger_Mode(PWM_SEC_1, PWM_TRIG_MODE_RETRIGGERABLE);
    PWM_Trigger_Mode(PWM_PRI_2, PWM_TRIG_MODE_RETRIGGERABLE);
    PWM_Trigger_Mode(PWM_SEC_2, PWM_TRIG_MODE_RETRIGGERABLE);
    
    // PWM Swap output based on the hardware
    PWM_Swap_PWMxL_and_PWMxH(PWM_PRI_2, true);
    PWM_Swap_PWMxL_and_PWMxH(PWM_SEC_2, true);
    
    // Fault mode is Latched mode
    PWM_PCI_Fault_AcceptanceCriteria(PWM_PRI_1, PWM_PCI_ACCEPT_LATCHED);     
    PWM_PCI_Fault_AcceptanceCriteria(PWM_SEC_1, PWM_PCI_ACCEPT_LATCHED);    
    PWM_PCI_Fault_AcceptanceCriteria(PWM_PRI_2, PWM_PCI_ACCEPT_LATCHED);     
    PWM_PCI_Fault_AcceptanceCriteria(PWM_SEC_2, PWM_PCI_ACCEPT_LATCHED);    
    
    // Stop PWMs straight away upon detection of a fault
    PWM_PCI_Fault_TimetoTerminateAfterEvent(PWM_PRI_1, PWM_PCI_TERMTIME_AFTER_EVENT_IMMEDIATE);
    PWM_PCI_Fault_TimetoTerminateAfterEvent(PWM_SEC_1, PWM_PCI_TERMTIME_AFTER_EVENT_IMMEDIATE);
    PWM_PCI_Fault_TimetoTerminateAfterEvent(PWM_PRI_2, PWM_PCI_TERMTIME_AFTER_EVENT_IMMEDIATE);
    PWM_PCI_Fault_TimetoTerminateAfterEvent(PWM_SEC_2, PWM_PCI_TERMTIME_AFTER_EVENT_IMMEDIATE);
    
    PWM_Fault_DataMode(PWM_PRI_1, PWM_FAULT_EVENT_PWML);
    PWM_Fault_DataMode(PWM_SEC_1, PWM_FAULT_EVENT_PWML);
    PWM_Fault_DataMode(PWM_PRI_2, PWM_FAULT_EVENT_PWML);
    PWM_Fault_DataMode(PWM_SEC_2, PWM_FAULT_EVENT_PWML);
    
}
 
#endif  /* DRV_MCC_CONFIG_PWM_H */