3.8/7.6 kw Totem pole Demonstration Application: Globals

		3.8/7.6 kw Totem pole Demonstration Application (Part-No. (not specified))
Content

Loading...

Searching...

No Matches

Here is a list of all enum values with links to the files they belong to:

- a -

ADC_10_BIT_RESOLUTION : adc_types.h
ADC_12_BIT_RESOLUTION : adc_types.h
ADC_6_BIT_RESOLUTION : adc_types.h
ADC_8_BIT_RESOLUTION : adc_types.h
ADC_CORE_0 : adc_types.h
ADC_CORE_1 : adc_types.h
ADC_MAX_CHANNELS : adc_types.h
ADC_MAX_CMPS : adc_types.h
ADC_MAX_DEDICATED_CORES : adc_types.h
ADC_PWM_HS_NOT_AVAILABLE : adc_types.h
ADC_PWM_TRIGGERS_NOT_AVAILABLE : adc_types.h

- c -

CAN1_FIFO_1 : can1.h
CAN1_TXQ : can1.h
CAN_2_0_FORMAT : can_types.h
CAN_BRS_MODE : can_types.h
CAN_CONFIGURATION_MODE : can_types.h
CAN_DISABLE_MODE : can_types.h
CAN_EXTERNAL_LOOPBACK_MODE : can_types.h
CAN_FD_FORMAT : can_types.h
CAN_FRAME_DATA : can_types.h
CAN_FRAME_EXT : can_types.h
CAN_FRAME_RTR : can_types.h
CAN_FRAME_STD : can_types.h
CAN_INTERNAL_LOOPBACK_MODE : can_types.h
CAN_LISTEN_ONLY_MODE : can_types.h
CAN_NON_BRS_MODE : can_types.h
CAN_NORMAL_2_0_MODE : can_types.h
CAN_NORMAL_FD_MODE : can_types.h
CAN_OP_MODE_REQUEST_FAIL : can_types.h
CAN_OP_MODE_REQUEST_SUCCESS : can_types.h
CAN_OP_MODE_SYS_ERROR_OCCURED : can_types.h
CAN_RESTRICTED_OPERATION_MODE : can_types.h
CAN_RX_MSG_AVAILABLE : can_types.h
CAN_RX_MSG_NOT_AVAILABLE : can_types.h
CAN_RX_MSG_OVERFLOW : can_types.h
CAN_TX_FIFO_AVAILABLE : can_types.h
CAN_TX_FIFO_FULL : can_types.h
CAN_TX_MSG_REQUEST_BRS_ERROR : can_types.h
CAN_TX_MSG_REQUEST_DLC_EXCEED_ERROR : can_types.h
CAN_TX_MSG_REQUEST_FIFO_FULL : can_types.h
CAN_TX_MSG_REQUEST_SUCCESS : can_types.h
CLIENT_CONFIG : spi1.h
CORCON_MODE_DISABLEALLSAT_ROUNDBIASED : system_types.h
CORCON_MODE_DISABLEALLSAT_ROUNDUNBIASED : system_types.h
CORCON_MODE_ENABLEALLSATNORMAL_ROUNDBIASED : system_types.h
CORCON_MODE_ENABLEALLSATNORMAL_ROUNDUNBIASED : system_types.h
CORCON_MODE_ENABLEALLSATSUPER_ROUNDBIASED : system_types.h
CORCON_MODE_ENABLEALLSATSUPER_ROUNDUNBIASED : system_types.h
CORCON_MODE_PORVALUES : system_types.h
CORE_0 : adc_types.h
CORE_1 : adc_types.h

- d -

DLC_0 : can_types.h
DLC_1 : can_types.h
DLC_12 : can_types.h
DLC_16 : can_types.h
DLC_2 : can_types.h
DLC_20 : can_types.h
DLC_24 : can_types.h
DLC_3 : can_types.h
DLC_32 : can_types.h
DLC_4 : can_types.h
DLC_48 : can_types.h
DLC_5 : can_types.h
DLC_6 : can_types.h
DLC_64 : can_types.h
DLC_7 : can_types.h
DLC_8 : can_types.h
DMA_CHANNEL_0 : dma_types.h
DMA_CHANNEL_1 : dma_types.h
DMA_CHANNEL_2 : dma_types.h
DMA_CHANNEL_3 : dma_types.h
DMA_CHANNEL_4 : dma_types.h
DMA_CHANNEL_5 : dma_types.h
DMA_NUMBER_OF_CHANNELS : dma_types.h

- f -

FB_AC_N : adc_types.h
FB_Vout : adc_types.h

- i -

IL1_F : adc_types.h
IL2_F : adc_types.h

- m -

MAIN_CORE_SYSTEM_STATUS_IDLE_MODE : main_core_types.h
MAIN_CORE_SYSTEM_STATUS_IN_RESET_STATE : main_core_types.h
MAIN_CORE_SYSTEM_STATUS_NOT_IN_LOW_POWER_MODE : main_core_types.h
MAIN_CORE_SYSTEM_STATUS_RUNNING_STATE : main_core_types.h
MAIN_CORE_SYSTEM_STATUS_SLEEP_MODE : main_core_types.h
MAX_CHANNELS : adc_types.h
MAX_CMPS : adc_types.h
MAX_DEDICATED_CORES : adc_types.h
MSI1_ProtocolA : sec_core_types.h, main_core_types.h
MSI1_ProtocolA_SIZE : sec_core_types.h, main_core_types.h
MSI1_ProtocolB : sec_core_types.h, main_core_types.h
MSI1_ProtocolB_SIZE : sec_core_types.h, main_core_types.h

- p -

PCS_DELAY_AFTER_RELAYON : dev_TPBLPFC_typedef.h
PCS_INIT : dev_TPBLPFC_typedef.h
PCS_RELAYON : dev_TPBLPFC_typedef.h
PCS_SOFT_START : dev_TPBLPFC_typedef.h
PCS_STALL_DEBUG : dev_TPBLPFC_typedef.h
PCS_STANDBY : dev_TPBLPFC_typedef.h
PCS_START_CONTROL : dev_TPBLPFC_typedef.h
PCS_UP_AND_RUNNING : dev_TPBLPFC_typedef.h
PCS_VACOK : dev_TPBLPFC_typedef.h
PCS_VOUT_PRELOAD : dev_TPBLPFC_typedef.h
PCS_WAIT_IF_FAULT_ACTIVE : dev_TPBLPFC_typedef.h
PWM_EVENT_A : pwm_hs_types.h
PWM_EVENT_B : pwm_hs_types.h
PWM_EVENT_C : pwm_hs_types.h
PWM_EVENT_D : pwm_hs_types.h
PWM_EVENT_E : pwm_hs_types.h
PWM_EVENT_F : pwm_hs_types.h
PWM_GENERATOR_1 : pwm_hs_types.h
PWM_GENERATOR_2 : pwm_hs_types.h
PWM_GENERATOR_INTERRUPT_CURRENT_LIMIT : pwm_hs_types.h
PWM_GENERATOR_INTERRUPT_FAULT : pwm_hs_types.h
PWM_GENERATOR_INTERRUPT_FEED_FORWARD : pwm_hs_types.h
PWM_GENERATOR_INTERRUPT_SYNC : pwm_hs_types.h
PWM_MAX_GENERATOR : pwm_hs_types.h
PWM_MODE_CENTER_ALIGNED : pwm_hs_types.h
PWM_MODE_DOUBLE_UPDATE_CENTER_ALIGNED : pwm_hs_types.h
PWM_MODE_DUAL_EDGE_CENTER_ALIGNED_ONE_UPDATE_CYCLE : pwm_hs_types.h
PWM_MODE_DUAL_EDGE_CENTER_ALIGNED_TWO_UPDATES_CYCLE : pwm_hs_types.h
PWM_MODE_INDEPENDENT_EDGE : pwm_hs_types.h
PWM_MODE_INDEPENDENT_EDGE_DUAL_OUTPUT : pwm_hs_types.h
PWM_MODE_VARIABLE_PHASE : pwm_hs_types.h
PWM_SOURCE_SELECT_INDEPENDENT : pwm_hs_types.h
PWM_SOURCE_SELECT_MASTER : pwm_hs_types.h
PWM_TRIGGER_COMPARE_A : pwm_hs_types.h
PWM_TRIGGER_COMPARE_B : pwm_hs_types.h
PWM_TRIGGER_COMPARE_C : pwm_hs_types.h

- r -

RESET_ERROR_RCON_CM : reset_types.h
RESET_ERROR_RCON_IOPUWR : reset_types.h
RESET_ERROR_RCON_TRAPR : reset_types.h
RESET_ERROR_RCON_WDTO_ISR : reset_types.h
RESET_MASK_CM : reset_types.h
RESET_MASK_EXTR : reset_types.h
RESET_MASK_IOPUWR : reset_types.h
RESET_MASK_POR : reset_types.h
RESET_MASK_SWR : reset_types.h
RESET_MASK_TRAPR : reset_types.h
RESET_MASK_WDTO : reset_types.h

- s -

SEC_CORE_RESET_CAUSE_UNSPECIFIED : sec_core_types.h
SEC_CORE_RESET_CAUSE_WATCHDOG : sec_core_types.h
SEC_CORE_SYSTEM_STATUS_IDLE_MODE : sec_core_types.h
SEC_CORE_SYSTEM_STATUS_IN_RESET_STATE : sec_core_types.h
SEC_CORE_SYSTEM_STATUS_NOT_IN_LOW_POWER_MODE : sec_core_types.h
SEC_CORE_SYSTEM_STATUS_RUNNING_STATE : sec_core_types.h
SEC_CORE_SYSTEM_STATUS_SLEEP_MODE : sec_core_types.h
STATE_ONLINE : drv_dma.c
STATE_WAIT_VALID_VIN_SENSE_OFFSET : drv_dma.c

- u -

UART_ERROR_AUTOBAUD_OVERFLOW_MASK : uart_types.h
UART_ERROR_FRAMING_MASK : uart_types.h
UART_ERROR_PARITY_MASK : uart_types.h
UART_ERROR_RX_OVERRUN_MASK : uart_types.h
UART_ERROR_TX_COLLISION_MASK : uart_types.h

- v -

VACM_STATE_ACDROP : vac_monitor_typedef.h
VACM_STATE_ACSYNC : vac_monitor_typedef.h
VACM_STATE_DCDETECT : vac_monitor_typedef.h
VACM_STATE_DCMODE : vac_monitor_typedef.h
VACM_STATE_ONLINE : vac_monitor_typedef.h
VACM_STATE_STANDBY : vac_monitor_typedef.h
VACM_STATE_WAIT_ZC : vac_monitor_typedef.h