3.8/7.6 kw Totem pole Demonstration Application: Data Fields - Variables

		3.8/7.6 kw Totem pole Demonstration Application (Part-No. (not specified))
Content

Loading...

Searching...

No Matches

Here is a list of all variables with links to the structures/unions they belong to:

- v -

VAC_OK : ACCONTROL_PHASE_STATUS_FLAGS_s
VAC_Polarity : ACCONTROL_PHASE_STATUS_FLAGS_s
VAC_Polarity_Changed : CONTROL_STATUS_FLAGS_s
VAC_Polarity_Changed_last : CONTROL_STATUS_FLAGS_s
VAC_Polarity_last : CONTROL_STATUS_FLAGS_s
VACdrop : ACCONTROL_PHASE_STATUS_FLAGS_s
vacOpAmpBias : DRV_DMA_DATA_s
value : ACCONTROL_PHASE_STATUS_FLAGS_s, AUX_FLAGS_s, CONTROL_STATUS_FLAGS_s, HOUSEKEEPING_STATUS_s, I2C_STATUS_s, PFC_FLAGS_s, SIC_FLAGS_s, VACM_FAULT_s, VACM_STATUS_s
VariableGain : CONTROL_STATUS_FLAGS_s
VariableGainCounter : CONTROLLER_VALUES_s
VBode : VMC_VALUES_s
VDC_Input_Voltage : ACCONTROL_PHASE_STATUS_FLAGS_s
vin : VACM_s
Vin_div_Averaged2 : ANALOG_VALUES_s
Vin_div_Averaged2_Freezed : ANALOG_VALUES_s
vin_present_counter : VACM_TIMEBASE_s
vinAdcBuf1 : DRV_DMA_DATA_s
vinAdcBuf2 : DRV_DMA_DATA_s
vinAdcBuf3 : DRV_DMA_DATA_s
vinAdcRaw : DRV_DMA_DATA_s
vloop_ff : VACM_VIN_s
Voltage_Loop_Output : CONTROL_REFERENCE_VALUES_s
Vout : VMC_VALUES_s
VOUT_dV_dt_Active : CONTROL_REFERENCE_VALUES_s
VOUT_dV_dt_Hystresis_High : CONTROL_REFERENCE_VALUES_s
VOUT_dV_dt_Hystresis_Low : CONTROL_REFERENCE_VALUES_s
VOUT_dV_dt_Up : CONTROL_REFERENCE_VALUES_s
VOUT_Hystresis_High : CONTROL_REFERENCE_VALUES_s
VOUT_Hystresis_Low : CONTROL_REFERENCE_VALUES_s
Vout_MidPoint : VMC_VALUES_s